Technology

Mag Force Generator Technology

Nullgrav/Mag Force Generators has created a “new” alternative energy technology with numerous and significant advances over the “old” generator technology used today.

1. The Mag Force Generator technology does not slow down under load. A unique characteristic of the US Patent #7,327,061 AC Generator and Method is that it exhibits an absence of slowing down under load that is seen in all “old technology” conventional Electric Generators. This has been confirmed by an independent test conducted by Lake Superior State University Prototype Development Center. By configuring both the magnets and output coils in a fixed (non spinning) orientation and instead spinning magnetically conductive Commutators which convey the magnetism to the coils there is no way for the Back Electromotive Force (Back EMF) from the coils under electrical load to cause additional resistance to rotation.

2. In fact this new generator method reveals it is easier to spin under load. In the Mag Force Generator the EMF ('drives' an electric current (ELECTRO-motive force) / MMF ('drives' magnetism (MAGNETO-motive force) operate in alternative planes of the Right-Hand-Rule (right hand rule (for generators) shows the direction of induced current flow when a conductor moves in a magnetic field) compared to traditional (old technology), which has been proven to provide more peak electrical outputs with fewer torque limits due to minimization of Back-EMF (back electromotive force is the voltage, or electromotive force, that pushes against the current which induces it).

3. The Mag Force Generator technology may achieve a better efficiency because secondary magnetic fields created by induction of current interfere little with the primary magnetic fields. This benefit has another related benefit in that stronger net magnet induction effects occur than in conventional generators due to the reduced effect of secondary magnetic fields, also known as “Constructive vs. Destructive MMF/EMF Interference.”

4. The Mag Force Generator methods of adjustment allow the generator to have increased efficiency due to reduction in the air gaps between the Commutators ( Commutators are an electrical switch that periodically reverses the current in an electric motor or electrical generator.) and electric bars and magnets. Electromagnetic efficiency in the transference of fields and waves between the Commutators and bars may increase exponentially as the gap is closed, tending toward zero.

5. The Mag Force Generator design rotates less mass in the Commutators than conventional generators do in the rotors. Because a significantly smaller mass is under rotation the Mag Force generator may extract equivalent electrical energy outputs compared to traditional means with less torque required due to minimization of Centrifugal forces in the Rotor (Centrifugal forces represents the effects of inertia that arise in connection with rotation and which are experienced as an outward force away from the center of rotation) and the horsepower required to rotate the mass.

6. The relatively constant torque requirement of the Mag Force Generator greatly improves the job of the prime mover whether it be a wind driven apparatus, fuel consuming motor, nuclear or fossil fuel steam turbine or even hydroelectric application. The varying torque requirement of current day generators impart varying loads on the prime mover system that is inefficient and can decrease longevity. A constant torque regardless of electrical load would be a great improvement for any generating system.

7. The Mag Force Generator concept needs “no special tools or processes” to manufacture, the simplifications create savings and less overall copper use (more EM work is being done in less copper).The Mag Force Generator MMF field & EMF field design is separated by a “circumferential” physical gap between mechanical parts, while traditional Tesla technology is a “radial” physical gap between MMF & EMF fields, the rotor & stator. This is a core difference between the “old” Tesla vs. the “new” Nullgrav/Mag Force Generator technologies could lead to a major reduction in torque. Moving the MMF/EMF boundary layer from the radial to the circumferential position in the “new” technology could allow the dual fields to cooperate in more free space, as they are not being bound-up radially opposing one another like in the “old” technology.

Mag Force Generators presents the next generation of alternative energy technology

**Portions of the above document are provided by Eric Erfourth – BSEE, Michigan State University

-Greater Minneapolis-St. Paul Area

Box 373 * L’Anse MI 49946-0373

906-395-2864
nullgrav@up.net